Prepare Grain Bins Responsibly Using These Safety Tips
Farmers are reminded to practice safety around grain bins and grain-handling equipment.
by Kristina TeBockhorst, Iowa State University
With harvest season in full swing, farmers are reminded to practice safety around grain bins and grain-handling equipment.
There were nine reported grain entrapments in Iowa in 2022, more than any other state, according to an annual report by Purdue University.
Agricultural confined-space-related cases of injuries and fatalities — including grain entrapment cases, which rose nearly 45% — saw a dramatic rise in 2022.
Nearly all of these cases involved grain flow issues due to grain spoilage, which means that improved grain management could help prevent cases in the future, according to Kristina TeBockhorst, an ag engineer with Iowa State University Extension and Outreach.
TeBockhorst is publishing a series of short articles that highlight important considerations for grain safety, including storing grain without spoilage. Her first article covers bin preparation — how to safely clean and prepare bins before new grain arrives.
 With harvest season in full swing, farmers are reminded to practice safety around grain bins and grainhandling equipment. [Illustration courtesy Iowa State University Extension and Outreach.] |
“Now is the time to take inventory of your bins and ensure they are in good condition for the new crop,” says TeBockhorst. “These to-do lists aren’t fun, but they will help minimize grain spoilage from insect and mold activity and moisture entry.”
When cleaning out old grain, be sure to wear a respirator approved by the National Institute for Occupational Safety and Health (NIOSH) that is certified for grain dusts and that fits your face to fully seal and protect you.
She advises farmers to “start with a clean bin, exterior bin perimeter and handling equipment” by removing potential food sources for pests, including residual grain, broken kernels, fines, foreign material, dusts and molds.
- 1. Sweep the bin walls and floor, making sure to clean the tops of doors, inside hollow pipes or ladders, and inside of augers.
- 2. Trim down vegetation, remove grain material and debris, and consider using a rodenticide around the bin’s outer perimeter.
- 3. Clean out dust and debris from harvesting and handling equipment, like combines, trucks, wagons, augers, and in grain legs and elevators.
- 4. While the bin is empty, check mechanical parts and conduct needed maintenance, seal gaps or cracks along the bin, and check the roof for potential spots that could leak, especially around the vents or access doors.
- 5. If fines or Indian meal moth silks are starting to plug up the space below the floor, it is time to remove the floor, to vacuum or power wash.
- 6. If the aeration floor can’t be removed, fumigation is the best option to eliminate carryover insects.
- 7. Check that ladders are in good condition; consider upgrading them with cages or replacing with staircases.
- 8. Assemble your safety equipment for your grain-storage facility, like respirators, life harnesses and lockout tag-out kits for unloading equipment.
- 9. Ensure all bin entry points have clear warning labels, so all are aware of the hazards. Also, be sure children can’t enter bins and that they know of the hazards when they live or spend time around stored grain.
Editor’s note: Kristina TeBockhorst is an agricultural engineering specialist for Iowa State University Extension. [Lead image from Getty Images.]
